No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics of a Traffic Policy

Clearing Statistics of a Traffic Policy

This section describes the command for clearing statistics of a traffic policy.

Context

Once deleted, statistics cannot be restored. Therefore, use caution when deleting statistics.

Procedure

  • To clear the statistics of a traffic policy on an interface, run the reset traffic policy statistics interface interface-typeinterface-number [.sub-interface ] [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid ] { inbound | outbound } command in the user view.
  • To clear the statistics of a traffic policy on an bridge-domain, run the reset traffic policy statistics bridge-domain bdid { inbound | outbound } command in the user view.
  • To clear statistics about an AC-side traffic policy applied to a VPN instance, run the reset traffic policy statistics policy [ name policy-name ] statistics { vsi vsi-instance-name [ ac-mode ] | vpn-instance vpn-instance-name } [ slot slot-id ] { inbound | outbound } command.
  • To clear flow CAR entries on a specific board or the device, run the reset flow-car { source-ip | destination-ip } ip-address slot slot-id or reset flow-car all command.
  • To clear flow CAR statistics about specific-direction traffic in a specific slot based on the source or destination IP address, run the reset flow-car statistics { source-ip | destination-ip } ip-address slot slot-id command.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25958

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next