No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Bandwidth for Multicast Programs

Configuring Bandwidth for Multicast Programs

By configuring static bandwidth for multicast programs, you can assign fixed bandwidth for specific multicast programs; by configuring dynamic bandwidth for multicast programs, you can adjust the unicast bandwidth that exceeds the CIR to ensure bandwidth for multicast traffic.

Context

Perform the following steps on the router where you need to perform multicast virtual scheduling:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicastbandwidth

    The multicast bandwidth view is displayed.

  3. Run multicast-list { name list-name | index list-index | start-list-index start-list-index end-list-index end-list-index } { bandwidth bandwidth-value | detect-interval interval threshold threshold }

    The bandwidth for multicast programs is configured.

    • bandwidth bandwidth-value: configures the static bandwidth for multicast programs. The router always allocates bandwidth-value bandwidth for the corresponding multicast programs.

    • detect-interval interval threshold threshold: configures the dynamic bandwidth for multicast programs. The router makes statistics of the program bandwidth every interval seconds. If the threshold of bandwidth change does not exceed the value of threshold, the program bandwidth is regarded as normal. If the threshold of the bandwidth change exceeds the value of threshold, the unicast bandwidth is adjusted without changing the total bandwidth of the user.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22506

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next