Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Scheduling Parameters of an SQ
You can set the CIR, PIR, FQ profile, FQ mapping object, GQ name, name of the applied service profile, and the inbound or outbound direction.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number[ sub-interface-number ]
View of the specified interface is displayed.
- Run user-queue cir cir-value [ [ pir pir-value ] | [ flow-queue flow-queue-name ] | [ flow-mapping mapping-name ] | [ user-group-queue group-name ] ] *{ inbound | outbound }[ service-template service-template-name ]
Queue scheduling parameters are set for SQ and HQoS is enabled.
![]()
NOTE: To set the presion scheduling length for a service template run the command network-header-length in the service-template view. - (Optional) Run user-queue shaping ldp-traffic outbound
HQoS is allowed to be effective for L3VPN, IP, VLL, VPLS and EVPN traffic on the interface.
- Run commit
The configuration is committed.
Previous
