No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multicast Shaping

Configuring Multicast Shaping

Multicast shaping limits the jitter of a multicast source within a reasonable range when there is a large volume of multicast traffic and the multicast source is busy.

Usage Scenario

After the IPTV multicast service is deployed, the multicast source may jitter when the multicast traffic is huge. When configured with the function of multicast shaping, the NE40E can shape the multicast traffic so that the jitter of the multicast source can be limited in an acceptable degree.

Pre-configuration Task

Before configuring multicast shaping, complete the following task:

  • Configuring the multicast service

Configuration Procedures

Figure 11-3 Flowchart for Configuring Multicast Shaping
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22189

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next