No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defining a Traffic Classifier

Defining a Traffic Classifier

Before configuring class-based QoS for the traffic on the network, you need to define a traffic classifier.


Perform the following steps on the router.


  1. Run system-view

    The system view is displayed.

  2. Run traffic classifier classifier-name [ operator { and | or } ]

    A traffic classifier is defined and the traffic classifier view is displayed.

    When a traffic classifier is defined for UCL, the logical relationship "and" between matching rules does not take effect.

  3. Run if-match [ ipv6 ] acl acl-number

    A UCL-based complex traffic classification rule is configured.

    In this configuration, the value of acl-number ranges from 6000 to 9999.

    To configure multiple UCL-based complex traffic classification rules, you can repeat this step.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22505

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next