No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying WRED

Applying WRED

Apply the configured WRED templates to the specified type of service.

Context

Do as follows on the router that is configured with WRED templates.

Procedure

  • Applying a WRED Template in the Interface View.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run port-queue cos-value { { pq | wfq weight weight-value | lpq } | shaping { shaping-value | shaping-percentage shaping-percentage-value } [ pbs pbs-value ] | port-wred wred-name | low-latency } * outbound

      The Class of Service (CoS), Committed Information Rate (CIR), and Peak Information Rate (PIR) are set in the outbound direction of the interface.

    4. (Optional) Run port-queue-alarm cos-value buffer percentage percentage-value

      An alarm threshold is set for the usage of QoS queues in the outbound direction of the interface.

    5. (Optional) Run port-queue-alarm cos-value { discard-packet discard-packet-number | discard-byte discard-byte-number | discard-packet-ratio discard-packet-coefficient discard-packet-exponent } interval interval-time

      Enables the packet loss alarm function for port queues.

    6. Run commit

      The configuration is committed.

  • Applying a WRED Template for an MTunnel in the Slot View
    1. Run system-view

      The system view is displayed.

    2. Run slot slot-id

      The slot view is displayed.

    3. Run port-queue cos-value { { pq | wfq weight weight-value | lpq } | shaping { shaping-value | shaping-percentage shaping-percentage-value } | port-wred wred-name } * outbound bind mtunnel

      Scheduling policies are configured for multicast queues of different classes on the MTunnel that is bound to distributed multicast VPN, and the previously configured WRED objects are applied to these scheduling policies.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25350

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next