No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Global QPPB

Configuring Global QPPB

Global QPPB allows packets of the same type to be scheduled using the same traffic policy.

Usage Scenario

In Figure 7-1, multiple interfaces on Device A receive packets of the same attribute and need to forward them to Device D. Customers require that the packets of the same attribute be scheduled using the same traffic policy.

Figure 7-1 Networking for global QPPB configuration

Pre-configuration Tasks

Before configuring global QPPB, complete the following tasks:

  • Configuring basic BGP functions

  • Configuring BGP to advertise local routes

  • Configuring the interfaces used to establish BGP connections

Configuration Procedures

Figure 7-2 QPPB configuration process
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22230

Downloads: 115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next