No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics on CAR

Clearing Statistics on CAR

This section describes how to clear statistics on CAR.


Queue statistics cannot be restored after you clear it. So, confirm the action before you use the command.

Make sure that you would clear the queue statistics and run the reset command in the user view to clear the existing queue statistics.

To clear CAR statistics of a specified interface, run the following reset commands in the user view.


  • Run the reset car statistics interface interface-type interface-number { inbound | outbound } command to clear CAR statistics for the specified direction of the specified Layer 3 interface.
  • Run the reset car statistics interface interface-type interface-number vlan vlan-id { inbound | outbound } command to reset CAR statistics in a specific direction on a specific Layer 2 interface.
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30573

Downloads: 146

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next