No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring HQoS Scheduling for Family Users

Configuring HQoS Scheduling for Family Users

HQoS for family users performs uniform scheduling for an entire family rather than individual terminals.

Usage Scenario

A family may use multiple terminals to demand various services, such as VoIP, IPTV, and HSI. These services have different requirements for delay, jitter, and bandwidth. In addition, requirements of high-priority services must be satisfied preferentially when network resources are insufficient. Therefore, QoS scheduling must be performed based on a family rather than on each separate terminal.

After users log in, the NE40E identifies services based on inner or outer VLAN IDs, 802.1p values, DSCP values, or DHCP-Option 60 information carried in user packets. The packets matching the identification condition are mapped to a domain and are authenticated.

After user authentication succeeds, if the interface is configured with a QoS profile and the access information of user packets matches the scheduling defined in the QoS profile, the access users are considered as family users; otherwise, they are considered as common users.


The services on a BAS interface or different sub-interfaces can participate in uniform QoS scheduling for family users if they have the same family attributes.

Pre-configuration Tasks

Before configuring HQoS scheduling for family users, complete the following tasks:

Configuring the BRAS function for the NE40E so that users can successfully access the network. (For details, refer to the HUAWEI NetEngine40E Universal Service Router Configuration Guide - User Access.)

Configuration Procedures

Figure 8-7 Flowchart of Configuring HQoS Scheduling for Family Users

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 26066

Downloads: 119

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next