No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying a QoS Profile to a Domain

Applying a QoS Profile to a Domain

You can define a QoS profile and then apply it to the AAA domain to perform QoS scheduling for access user traffic.

Context

NOTE:

Applying a QoS profile to an interface functions differently from applying a QoS profile to a domain. The parameters about the bandwidth allocated to family users are obtained through the QoS profile applied to the interface while the parameters about the bandwidth allocated based on service types are obtained through the QoS profile applied to the domain.

The system performs traffic scheduling on common online users in a domain by directly adopting the parameters in the QoS profile applied to the domain. For family users,however, the system adopts only the parameters in the car command that is configured in the view of the QoS profile applied to the domain for traffic rate limit.

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    A domain is created and the AAA domain view is displayed.

    Here, domain-name specifies the domain to which the service needs to be mapped.

  4. Run qos-profile qos-profile-name { inbound | outbound } [ lns-gts ]

    The QoS profile is applied to the domain.

    You can configure the parameter lns-gts only when you need to perform QoS scheduling on user services on an LNS. That is, the lns-gts parameter takes effect for only L2TP users.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 30111

Downloads: 141

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next