No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Modifying the Default Priority of PQ Scheduling

(Optional) Modifying the Default Priority of PQ Scheduling

This section describes how to modify the default priority of PQ scheduling.

Context

When CIR-based congestion occurs, if PQ and non-PQ schedulings must be distinguished for FQs between SQs, set the priority of PQ scheduling to high; if PQ and non-PQ schedulings do not need to be distinguished for FQs between SQs, set the priority of PQ scheduling to low.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run slot slot-id

    The slot view is displayed.

  3. Run qos pq-scheduler priority { high | low } { inbound | outbound }

    The PQ scheduling priority on a board is modified.

  4. Run qos pq-scheduler priority { high | low } outbound card card-id

    The PQ scheduling priority on a subcard is modified.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 25539

Downloads: 117

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next