No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Service Group

Configuring a Service Group

You need to create a service group before configuring UCL-based traffic policies.


Do as follows on the router.

This configuration is supported only on the Admin VS.


  1. Run system-view

    The system view is displayed.

  2. Run service-group group-name

    A new service group is created.

  3. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22039

Downloads: 114

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next