No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - QoS 01

This is NE40E V800R010C10SPC500 Configuration Guide - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional)Enabling the Statistical Function of a Traffic Policy

(Optional)Enabling the Statistical Function of a Traffic Policy

The statistical function of a traffic policy should be enabled when checking the statistic information.

Context

Do as follows on the router that is configured with traffic policies:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    The view of a specified traffic policy is displayed.

  3. Run statistics enable

    The statistical function of the traffic policy is enabled.

  4. Run share-mode

    The shared mode is specified for the traffic policy.

    NOTE:

    Step 3 is optional. To save memory, the statistical function of traffic policies is disabled by default. To display the statistics about a traffic policy, you can enable statistics for the traffic policy by running the statistics enable command.

    Step 4 is optional. The default attribute of a policy is shared.
    • After a traffic policy is applied to an interface, you cannot change the mode of the traffic policy, whether its attribute is shared or unshared. Before changing the shared or unshared mode of the traffic policy, you must disable the traffic policy on the interface.
    • If a shared traffic policy is applied to different interfaces, this shared traffic policy collects statistics on the traffic of all the interfaces as a whole. That is, the shared traffic policy does not collect statistics on the traffic of interfaces individually.
    • If an unshared traffic policy is applied to different interfaces, this unshared traffic policy collects statistics on the traffic of the interfaces individually.
    • A traffic policy collects statistics on incoming traffic and outgoing traffic individually, whether its attribute is shared or unshared.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055024

Views: 22364

Downloads: 115

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next