No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the PPPoE Access Service Configuration

Verifying the PPPoE Access Service Configuration

After PPPoE access is configured, check the configurations.

Procedure

  • Run the display pppoe statistics command to check statistics about PPPoE packets and authentication messages.
  • Run the display pppoe statistics online-fail-record command to check statistics about PPPoE user login failures due to the limit on the number of access users (configured using the access-ip-limit command).

Example

Run the display pppoe statistics command to view PPPoE packet statistics on the board in slot 1.

<HUAWEI> display pppoe statistics slot 1
 ---------------------------------------------------------------------
                       PPPoE Statistic Information
                                                 Slot:  1
  ---------------------------------------------------------------------
  ACTIVE_SESSION      : 3            TOTAL_SESSION       : 3
  
  RECV_PADI_PKT       : 6            DISCARD_PADI_PKT    : 2
  SEND_PADO_PKT       : 4
  RECV_PADR_PKT       : 4            DISCARD_PADR_PKT    : 1
  SEND_PADS_PKT       : 3            DISCARD_PADR_SAMEMAC: 0
  SEND_NULL_PADS_PKT  : 0
  RECV_PADT_PKT       : 0            DISCARD_PADT_PKT    : 0
  SEND_PADT_PKT       : 0
  SEND_PADM_PKT       : 0
  SEND_PADM_URL_PKT   : 0
  SEND_PADM_MOTM_PKT  : 0
  SEND_PADN_PKT       : 0
  
  RECV_SESSION_PKT    : 9            DISCARD_SESSION_PKT : 0
  SEND_SESSION_PKT    : 9
  RECV_PKT            : 19           DISCARD_PKT         : 3
  ---------------------------------------------------------------------
                           Invalid PAD Packets                         
  ---------------------------------------------------------------------
  Invalid Version             : 0
  Invalid PAD Code            : 0
  Invalid PAD Tags            : 0
  Invalid PAD Tag length      : 0
  Invalid PAD Type            : 0
  Invalid PADI Session        : 0
  Invalid PADR Session        : 0
  Invalid PAD packet length   : 0
  Other Invalid PAD packets   : 0
  Total Invalid PAD packets   : 0
  ---------------------------------------------------------------------
Run the display pppoe statistics online-fail-record command to view statistics about PPPoE user login failures due to access IP limit.
<HUAWEI> display pppoe statistics online-fail-record slot 3
  ---------------------------------------------------------------------

  Online failed due to access-ip-limit : 2

  ---------------------------------------------------------------------
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17742

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next