No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Extended Source Interfaces of a RADIUS Server

(Optional) Configuring the Extended Source Interfaces of a RADIUS Server

If you do not want to use the default extended source interface to send and receive RADIUS packets, you can change the default extended source interface of the RADIUS server.

Context

After you configure the extended source interfaces of the RADIUS server, the NE40E increases the number of packets sent to the RADIUS server in a certain period of time.

After the configuration, the NE40E sends RADIUS packets by using the extended source interfaces. The former half of extended source interfaces are used to send and receive RADIUS authentication packets, and the latter half of extended source interfaces are used to send and receive RADIUS accounting packets. If an odd number of extended source interfaces are configured, the authentication interfaces outnumber the accounting interfaces by one.

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-server extended-source-ports [start-port start-port-number ] port-number port-number

    The extended source interfaces of the RADIUS server are configured.

    NOTE:

    If you do not specify the start interface number when configuring the extended source interfaces, the system assigns a configured number of valid extended source interfaces.

  3. Run radius-server extended-source-ports algorithm round-robin

    The NE40E is enabled to use the round-robin algorithm to select an extended source port.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17155

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next