No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the maximum number of users allowed on an L2TP LAC

(Optional) Setting the maximum number of users allowed on an L2TP LAC

Setting the maximum number of users allowed on an L2TP LAC

Context

When deploying L2TP LAC 2:1 hot backup, you can run the l2tp lac session-limit command to set the maximum number of users allowed on an L2TP LAC to 64K.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run l2tp lac session-limit 64k

    The maximum number of users allowed on an L2TP LAC is set to 64K.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17169

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next