No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv4 Address Management

Overview of IPv4 Address Management

IPv4 address management includes obtaining an IP address dynamically and configuring a fixed IP address.

The NE40E allows a user to access the network by obtaining an IP address dynamically or configuring a fixed IP address.

  • Obtaining an IP address dynamically

    Users can use DHCP or IPCP (for PPP users) to obtain IP addresses from the address pool of the NE40E. After a user goes offline, the IP address previously assigned to this user can be assigned to another user.

  • Configuring a static IP address

    A user can configure a static IP address on the computer. After the user goes offline, the static IP address cannot be assigned to other users.

  • Obtaining an IP address delivered by the RADIUS server

    User IP addresses can be delivered by the RADIUS server to the NE40E in the Framed-IP-Address attribute. Users can use DHCP or IPCP (for PPP users) to interact with the NE40E to obtain IP addresses.

The NE40E can allocate address segments through the IPCP protocol. The gateway address and mask of the address segment must be delivered by the RADIUS server. Therefore, the NE40E can allocate a gateway and a mask to a family user. Multiple user terminals can be connected to the gateway and the terminals in the same network segment can communicate with each other.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17349

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next