No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Policies for User Authentication Failures

(Optional) Configuring Policies for User Authentication Failures

Context

Perform the following steps on the NE40E:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run

    user-qos cir-zero { cir-value | unlimited }

    The CIR of user traffic when the CIR and PIR delivered by the RADIUS server are both 0s is set.

    NOTE:

    This command can be used only when the upstream and downstream CIR and PIR delivered by the RADIUS server are both 0s.

  4. Run quit

    Return to the system view.

  5. Run radius-server group group-name

    The RADIUS server group view is displayed.

  6. Run radius-attribute qos-profile no-exist-policy { online | offline }

    The policy whether to allow users to keep online when the QoS profile delivered by the RADIUS server is not configured on the NE40E is configured.

  7. Run radius-attribute policy-name no-exist-policy { online | offline }

    The policy whether to allow users to keep online when the policy name delivered by the RADIUS server is not configured on the NE40E is configured.

  8. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17778

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next