No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Specifying a Group for a Domain

(Optional) Specifying a Group for a Domain

A domain can be specified to belong to a user group or a VPN instance. This allows the domain to be flexibly associated with various services.

Context

A domain can belong to any of the following groups:

  • User group

    A user group is used to control the access right of users and implement ACLs. Up to 255 user groups can be configured on the NE40E.

  • VPN instance

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    A domain is created and the domain view is displayed.

  4. Run the following command as required:

    • To specify a user group for the domain, run user-group group-name

    • To specify a VPN instance for the domain, run vpn-instance instance-name

    • To specify an inbound VPN instance for the AAA domain, run vpn-instance vpn-instance-name inbound

      NOTE:

      This configuration applies to hub and spoke networking scenarios. The VPN instances configured using the vpn-instance vpn-instance-name inbound and vpn-instance vpn-instance-name commands cannot be the same.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17641

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next