No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multicast Two-node Hot Backup

Configuring Multicast Two-node Hot Backup

Configuring multicast two-node hot backup improves reliability for networks that bear multicast services. This feature ensures multicast service continuity in case of a BRAS failure.

Pre-configuration Tasks

Before configuring multicast two-node hot backup, complete the following tasks:

  • Establish a multi-device backup platform.

  • Configure multi-device backup for IPv4 BRAS user information.

Configuration Procedure

Perform one or more of the following configurations (excluding checking the configuration) as required.

Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17711

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next