No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Adjusting L2TP Connection Parameters

(Optional) Adjusting L2TP Connection Parameters

By adjusting L2TP connection parameters, you can flexibly control the establishment of L2TP tunnels and the interconnection between Huawei devices and non-Huawei devices.

Usage Scenario

This section describes the optional configurations relevant to the L2TP connection. These configurations can be used when the NE40E functions as an LAC, an LNS, or an LTS. In most cases, default configurations are used.

Optional configurations of an L2TP connection include tunnel authentication, AVP hidden in transmission, hello interval, control packet retransmission, and idle-cut timer of a tunnel.

Pre-configuration Tasks

Before tuning an L2TP connection, complete the following task:

Enabling L2TP

Configuration Procedures

Figure 10-6 Flowchart for adjusting L2TP connections
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17139

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next