No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a QoS Profile

Configuring a QoS Profile

A QoS profile contains user queue parameters and scheduling parameters. Different QoS applications can use the same QoS profile.


Perform the following steps on the NE40E that functions as the LNS:


  1. Run system-view

    The system view is displayed.

  2. Run qos-profile qos-profile-name

    A QoS profile is created and the QoS profile view is displayed.

  3. Run user-queue cir cir-value [ [ pir pir-value ] | [ flow-queue flow-queue-name ] | [ flow-mapping mapping-name ] | [ user-group-queue group-name ] | [ service-template service-template-name ] ] *[ inbound | outbound ]

    Queue scheduling parameters are set for user queues.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17375

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next