No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the User management Configuration

Verifying the User management Configuration

After user management is configured, you can view configuration of the user name format and user account parsing.

Procedure

  • Run the display static-user command to check information about static users.
  • Run the display aaa configuration command to check the configuration of the user account parsing function.
  • Run the display vlanpvc-to-username command to check the configuration of the format of the IPoX user name.
  • Run the display call rate command to check the put-through rate of all type of users.
  • Run the display access trigger user-table command to check information about users whose access packets are limited on a board.
  • Run the display access-ip-number { interface interface-type interface-number | slot slot-id }* user-type ppp command to check the configuration of the number of IP addresses for PPP users who log in from a specified interface or a specified board.
  • Run the display trace access-user object [ object-id ] command to display the configurations of all the service objects to be traced or service objects with specified IDs.
  • Run the display aaa online-fail-record dhcp statistics command to check user login failure records.
  • Run the display access delay load-balance [ group group-name ] command to check information about a configured load balancing group.

Example

After the configuration is complete, you can run the display static-user command to view information about static users.

<HUAWEI> display static-user
   ---------------------------------------------------------------------------
   Interface       VLAN-ID        IP-address      MAC-address      VPN
                                  IPv6-address
                                  IPv6-delegation-prefix
   ---------------------------------------------------------------------------
   GE2/0/3.1        1/1            10.255.255.241         -               -         
                                   -                   
                                   -                  
   GE2/0/3.1        1/1            10.255.255.249       -               -        
                                   -                   
                                   -                   
   ---------------------------------------------------------------------------
   Total 2 item(s) matched   

After the configuration is complete, you can run the display aaa configuration command to view the configuration of the user account parsing function.

<HUAWEI> display aaa configuration
---------------------------------------------------------------------------
  AAA configuration information :
  ---------------------------------------------------------------------------
  Parse Priority                   : Domain first
  Domain Name Delimiter            : @
  Domainname parse direction       : Left to right
  Domainname location              : After-delimiter
  Realm name delimiter             : -
  Realmname parse direction        : Left to right
  Realmname location               : Before-delimiter
  Domain                           : total: 1024  used: 6
  Authentication-scheme            : total: 32    used: 3
  Authorization-scheme             : total: 32    used: 1
  Accounting-scheme                : total: 256   used: 3
  Recording-scheme                 : total: 128   used: 0
  AAA-access-user                  : total: 279552 used: 0
  Access-user-state                : authen: 0    author: 0    accounting: 0
  Transition-step                  : -
  Min-Delay-time                   : -
  Max-Delay-time                   : -
  Access speed                     : -
  Offline speed                    : 256(/s)
  Account-session-id-version       : Version1
 Remote-download configuration    :
    Remote user-group              : enable
    Remote user-group check interval: 10
    Remote acl                     : enable
  Edsg update-user-ip-acct         : enable
  -------------------------------------------------------------------

After the configuration is complete, you can run the display vlanpvc-to-username command to view the configuration of the format of the IPoX user name.

<HUAWEI> display vlanpvc-to-username
  Version of vlan and pvc model in username : Version2.0

After the configuration is complete, you can run the display call rate command to view the put-through rate of all type of users.

<HUAWEI> display call rate
User callrate:
 --------------------------------------------------------
 Usertype      Calltime      Callcompletion      Rate
 --------------------------------------------------------
 PPP             127                127         100.00%
 Dot1X           324                324         100.00%
 Web/Fast        7                   7          100.00%
 Bind            0                   0           0.00%
 Total           458                458         100.00%
After the configuration is complete, you can run the display access trigger user-table command to view information about users whose access packets are limited on the board in slot 1.
<HUAWEI> display access-trigger user-table slot 1 
-------------------------------------------------------------------------------------------------------------------
User Mac address    :0008-0201-0101                    
Access Interface    :GigabitEthernet1/0/1.1            
Access Pevlan/CeVlan:405/-                             
IPV4:                                                  
User IP address     :10.1.1.4                           
Start Limit Time    :2013-10-24 16:07:55               
Pass Packet         :28                                
Drop Packet         :0    
# After the configuration is complete, you can run the display trace access-user object command to display the configurations of all the service objects to be traced or service objects with specified IDs.
<HUAWEI> display trace access-user object 1
 Object ID             : 1                                                            
 MAC Address           : 0001-0001-0001                                               
 Output to VTY                                                                 
 Aging time            : 15   
Flow Report           : Enable                                  
 
 Object ID             : 2                                                            
 MAC Address           : 0001-0001-0002                                               
 Output to VTY                                                                 
 Aging time            : 15 
 Flow Report           : Enable
 --------------------------      
# After the configuration is complete, you can run the display aaa online-fail-record dhcp statistics command to check user login failure records.
<HUAWEI>display aaa online-fail-record dhcp statistics
------------------------------------------------------------------------------------------------
DHCPv4 online failures                  :    10
DHCPv6 online failures                  :    10
------------------------------------------------------------------------------------------------
# After the configuration is complete, you can run the display access delay load-balance command to check information about a configured load balancing group.
<HUAWEI> display access delay load-balance group huawei
Group-name:huawei                        Member-count:2

Active-count:2                        Delay-time:0

-------------------------------------------------------------------------
Member-InterfaceName      Number  DelayTime  Count  Chasten  UpDownTime  
-------------------------------------------------------------------------

GigabitEthernet1/0/1.1      0       20          0       0         -       

GigabitEthernet2/0/1.1      1       20          0       0         -       

 -------------------------------------------------------------------------
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17567

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next