No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the PPP Magic Number Check Function

(Optional) Configuring the PPP Magic Number Check Function

You can configure the PPP magic number check function to detect whether a PPPoE user stays online after the user logs in.

Context

After a PPPoE user goes online, the device periodically sends Echo Request packets to the client.

When receiving an Echo Reply packet from the user, the device compares the magic number carried in the packet with that learned during LCP negotiation. If the two magic numbers are the same, the user is considered online. Otherwise, the user is considered offline.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ppp keepalive strict-check magic-number

    The PPP magic number check function is enabled so that the device compares the magic number in a received Echo Reply packet with that learned during LCP negotiation.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17315

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next