No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the User Name Format and Password

Configuring the User Name Format and Password

The NE40E supports the configuration of the user name format and password. No user name or password needs to be entered for users that attempt to get online through binding.

Context

Perform the following steps on the router:

NOTE:
  • The new password is at least eight characters long and contains at least two of upper-case letters, lower-case letters, digits, and special characters.
  • When configuring an authentication password, select the ciphertext mode because the password is saved in configuration files in simple text if you select simple text mode, which has a high risk. To ensure device security, change the password periodically.

Procedure

  • Configuring the generation mode of the user name of an IPoX user and the password of an IPoX user.
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run default-user-name [ template template-name ] include { sysname [ separator ] | gateway-address separator [ separator ] | ip-address separator [ separator ] | mac-address { separator | noseparator } [ separator ] | { option82 [ separator | { sub-option sub-option-code [ offset offset ] parse-mode { auto-identify [ offset ] | string [ length ] | binary length | hex [ length ] { class1 | class2 | class3 } } [ separator ] } &<1-4> ] | access-line-id [ separator | { circuit-id [ offset offset ] parse-mode { auto-identify [ offset ] | string [ length ] | binary length | hex [ length ] { class1 | class2 | class3 } } [ separator ] | remote-id [ offset offset ] parse-mode { auto-identify [ offset ] | string [ length ] | binary length | hex [ length ] { class1 | class2 | class3 } } [ separator ] } * ] } | { option60 | vendor-class } [ cn | [ offset offset ] { length length | sub-option sub-option-code [ sub-offset sub-offset ] [ sub-length sub-length ] } ] [ separator ] | { option61 | client-id } [ separator ] | option12 [ separator ] | pevlan [ separator ] | cevlan [ separator ] | slot [ seperator ] | port [ seperator ] | subslot [ seperator ] } *

      The router is configured to generate the IPoX user name according to information carried in the user access request packet.

      Or run vlanpvc-to-username { standard | turkey | version10 | version20 }

      Or run vlanpvc-to-username standard trust { pevlan | cevlan } [ ignore-rid ]

      Or run vlanpvc-to-username standard ignore-rid

      The router is configured to generate the IPoX user name by using the original format.

    4. (Optional) Run domain domain-name

      The AAA domain view is displayed.

    5. (Optional) Run radius-server domain-annex { left | right }annex-string

      A string added to the left or right of the domain name in the user name carried in an authentication request packet or in an accounting request packet sent from a BRAS to a RADIUS server is configured.

    6. (Optional) Run quit

      Return to the AAA view.

    7. Run default-password [ template template-name ] { cipher cipher-password | simple simple-password | { option60 | vendor-class } [ cn | [ offset offset ] { length length | sub-option sub-option-code [ sub-offset sub-offset ] [ sub-length sub-length ] } ] [ md5-encryt ] [ support hex ] | { option77 | user-class } }

      The password or password template of the IPoX user is configured.

      The differences between the cipher and simple keywords are as follows:

      If cipher is specified, you can enter an encrypted password. If simple is specified, you can enter only the original (non-encrypted) password. The cipher keyword supports longer passwords because encrypted passwords are longer than non-encrypted ones.

      NOTE:

      For the sake of device security, do not use the default password. Please change the password.

    8. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17326

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next