No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring PPPoE Server Parameters

(Optional) Configuring PPPoE Server Parameters

PPPoE server parameters can be configured as needed for negotiation between a PPPoE server and client.


PPPoE uses the client/server model. A PPPoE client initiates a connection request to a PPPoE server. After a session is established, the PPPoE server provides access control and authentication for the PPPoE client. To help clients identify PPPoE servers, configure a name, service name, and service name matching mode for each PPPoE server. To allow successful PPPoE negotiation between Huawei and non-Huawei devices, configure the timing for sending PADM or PADN packets and a delimiter between MOTM items.


  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-template virtual-template-number

    A VT is created and its view is displayed, or the view of an existing VT is displayed.

  3. Run pppoe-server ac-name ac-name

    A name is configured for the PPPoE server.

  4. Run pppoe-server service-name-parameter service-name-parameter

    A service name is configured for the PPPoE server.

  5. Run pppoe-server service-name-type exact-match

    A service name matching mode is configured.

  6. Run pppoe-server send { padm | padn } [ ipcp | ip6cp | { first | last | all } ncp ]

    When PADM or PADN packets are sent is configured.

  7. Run pppoe-server motm item delimiter delimiter

    A delimiter between MOTM items is configured.

  8. Run quit

    Return to the system view.

  9. Run pppoe-server send padt always

    Delayed PADT packet transmission is enabled.

  10. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17340

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next