No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing AAA Statistics

Clearing AAA Statistics

Clearing AAA statistics includes clearing statistics on the AAA server and accounting stop packets.

Context

Statistics cannot be restored after you clear them. Exercise caution when running the command.

Procedure

  • Run the reset radius statistics packet command in the system view to clear statistics about the RADIUS server.
  • Run the reset aaa statistics { authentication | accounting } [ domain domain-name ] command in any view to clear statistics about authentication or accounting packets.
  • Run the reset radius-attribute packet-count command in the user view to clear the number of times an attribute occurs in a RADIUS packet.
  • Run the reset aaa remote-download acl statistics [ classifier classifier-name | slot slot-id ] command in the user view to clear dynamic ACL statistics delivered by the RADIUS server.
  • Run the reset radius-server accounting-packet all command in the user view to clear all accounting packets from a cache queue.
  • Run the reset radius-server accounting-interim-packet { all | ip ip-address } command in the user view to clear real-time accounting packets from a cache queue.
  • Run the reset aaa online-fail-record dhcp statistics command in any view to clear user login failure records.
  • Run the reset max-onlineusers command in the system view to clear the maximum number of concurrent online users recorded by the system.

    You can clear statistics based on a specified board or domain.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17451

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next