No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Priority of a Domain User

(Optional) Setting the Priority of a Domain User

You can set a priority for each domain user so that users or services of different priorities are offered with different classes of services.

Context

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    The domain view is displayed.

  4. Run user-priority { upstream | downstream } { priority | trust-8021p-inner | trust-8021p-outer | trust-dscp | trust-dscp-inner | trust-dscp-outer | unchangeable | trust-exp-inner | trust-exp-outer }

    The priority of the domain user is set.

    Currently, one domain can be configured with only one user priority.

    • priority: user priority. The value ranges from 0 to 7.

    • trust-8021p-inner: The 802.1p priority in the inner tag of a Layer 2 user packets is used as the user priority.

    • trust-8021p-outer: The 802.1p priority in the outer tag of a Layer 2 user packet is used as the user priority.

    • trust-dscp: The DSCP value of a user packet is used as the user priority.

    • trust-dscp-inner: The DSCP value in the inner tag of a user packet is used as the user priority.

    • trust-dscp-outer: The DSCP value in the outer tag of a user packet is used as the user priority.

    • unchangeable: The user priority is fixed.

    • trust-exp-inner: The EXP value in the inner tag of an MPLS packet is used as the user priority.

    • trust-exp-outer: The EXP value in the outer tag of an MPLS packet is used as the user priority.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17201

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next