No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Source Interface of a RADIUS Server

(Optional) Configuring the Source Interface of a RADIUS Server

When the NE40E connects to multiple RADIUS servers, you can configure the source interface of each RADIUS server on the NE40E to identify the route between the NE40E and each RADIUS server.

Context

On the NE40E, you can configure the interface that connects to a RADIUS server as the source interface of the RADIUS server. On the NE40E, you can configure the source interface in the system view or in the view of a RADIUS server group. Therefore, the RADIUS servers in the RADIUS server group use this source interface to interact with the NE40E. If the source interface of the RADIUS server group is not configured, the RADIUS servers use the global source interface.

Perform the following steps on the router:

Procedure

  • Configure the global source interface of all RADIUS servers in all RADIUS server groups.
    1. Run system-view

      The system view is displayed.

    2. Run radius-server source interface interface-type interface-number

      The global source interface of all the RADIUS servers is configured.

  • Configure the source interface of a specified RADIUS server group.
    1. Run system-view

      The system view is displayed.

    2. Run radius-server group group-name

      The RADIUS server group view is displayed.

    3. Run radius-server source interface interface-type interface-number

      The source interface of the RADIUS server group is configured.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17342

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next