No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Servers for a Domain

Configuring Servers for a Domain

You can configure a RADIUS server or a DNS server for a domain as required.

Context

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    The domain view is displayed.

  4. (Optional) Run radius-server llid-first-authentication group domain-name

    A RADIUS server group for the first LLID authentication is configured.

  5. Configure a web authentication server.
    1. Run radius-server group group-name

      A RADIUS server group is specified for the domain.

    2. Run web-server { url url [ slave ] | url-parameter | ip-address [ ipv6–address ] [ slave ] | mode { get | post } | redirect-key { mscg-ip mscg-ip-key | mscg-name mscg-name-key | user-ip-address user-ip-key | user-location user-location-key } | user-first-url-key { key-name | default-name } | { ip-address [ ipv6–address ] | url url } bind web-auth-server ip-address [ vpn-instance vpn-instance ] slave }

      A mandatory web authentication server is specified for the domain.

    3. (Optional) Run web-server redirect-key subscription-id subscription-id

      The device is enabled to add the Option 82 information to the URL string in a redirection packet to be sent to a user.

  6. Configure a DNS server.
    1. Run radius-server group group-name

      A RADIUS server group is specified for the domain.

    2. Run dns { primary-ip |second-ip } ip-address

      The primary or secondary DNS server is specified for the domain.

      NOTE:

      If IP addresses are automatically allocated from the BAS address pool, the DNS server can be configured in both the domain view and the address pool view, but the configuration in the domain view takes precedence.

      The IP address of the DNS server for user access can be delivered by the RADIUS server, configured in the AAA domain view, or configured in the address pool view. The DNS server address configured in the AAA domain view has a higher priority than that configured in the address pool view but has a lower priority than that delivered by the RADIUS server.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17357

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next