No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Negotiated Parameters of the RADIUS Attribute

(Optional) Configuring Negotiated Parameters of the RADIUS Attribute

When the RADIUS server and NE40E communicate, they must have the same specifications for RADIUS attributes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-server group group-name

    The RADIUS server group view is displayed.

  3. (Optional) Run radius-attribute enable framed-ip-netmask netmask-length account-request

    The 32-bit Framed-IP-Netmask attribute can be added to an Accounting-Request packet.

  4. Run radius-attribute vendor vendor-id enable

    The ID of the vendor whose private RADIUS attribute the device can parse is added.

  5. Run radius-attribute vendor { { huawei | microsoft | 3gpp2 | redback | dslforum | other }* | all } continuous

    The NE40E is configured to carry multiple proprietary attributes in RADIUS attribute 26.

  6. Run radius-attribute include attribute-name

    An attribute can be added to a RADIUS packet only by using the radius-attribute include command. This can help control attributes in a RADIUS packet and prevent the length of a RADIUS packet from exceeding 2048 bytes.

  7. Run radius-attribute include hw-dhcp-option option-num&<1-16>

    The hw-dhcp-option attribute can be added to RADIUS authening packets.

  8. Run radius-attribute include reply-messag coa-nak

    The Reply-Message attribute can be added to coa-nak packets.

  9. Run radius-attribute include nas-ip-address { accounting-on | accounting-off }*

    The NAS-IP-Address attribute can be added to RADIUS accounting-on or accounting-off packets.

  10. Run radius-attribute usermac-as-option61

    The Option61 field is encapsulated into the No.153 proprietary attribute on the RADIUS server, hw-user-mac attribute. If you also configure the client-option82 version1 command on the BAS interface, the client-id information (DHCPv4 Option61/DHCPv6 Option1/PPPoE PADR Tag 0x0103 Host-unique) is encapsulated into the Class attributes in RADIUS accounting packets.

  11. Run radius-attribute include event-timestamp { accounting-on | accounting-off }

    A RADIUS Accounting-On or Accounting-Off packet is configured to carry the event-timestamp attribute.

  12. Run radius-attribute include class edsg

    The class attribute can be added to EDSG service accounting packets.

  13. Run radius-attribute include hw-dhcpv6-option37 accounting-request

    The HW-DHCPv6-Option37 attribute is allowed to be carried in user accounting request packets sent to the RADIUS server.

  14. Run radius-attribute include hw-vpn-instance accounting-request

    The HW-VPN-Instance attribute is allowed to be carried in user accounting request packets sent to the RADIUS server.

  15. Run radius-attribute include hw-web-url accounting-request

    The HW-Web-Url attribute is allowed to be carried in user accounting request packets sent to the RADIUS server.

  16. Run radius-attribute include framed-route accounting-request

    The Framed-Route attribute is allowed to be carried in user accounting request packets sent to the RADIUS server.

  17. Run radius-attribute include hw-acct-terminate-subcause edsg

    The HW-Acct-Terminate-Subcause attribute is allowed to be carried in EDSG service accounting stop packets.

  18. Run radius-attribute include hw-user-mac edsg accounting-request

    The HW-User-Mac attribute is allowed to be carried in EDSG service accounting request packets.

  19. Run radius-attribute include hw-nat-ip-address bod

    The HW-Nat-IP-Address attribute is allowed to be carried in BOD service accounting packets of CGN users.

  20. Run radius-attribute include hw-nat-start-port bod

    The HW-NAT-Start-Port attribute is allowed to be carried in BOD service accounting packets of CGN users.

  21. Run radius-attribute include hw-nat-end-port bod

    The HW-NAT-End-Port attribute is allowed to be carried in BOD service accounting packets of CGN users.

  22. Run radius-attribute include hw-avpair subscriber:vpnid accounting-request

    The user VPN index in the HW-Avpair attribute is allowed to be carried in accounting packets of IPv4 users.

  23. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17101

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next