No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the L2TP Connection Parameter Configuration

Verifying the L2TP Connection Parameter Configuration

After tuning an L2TP connection, you can view the L2TP group configuration on the devices at both ends of an L2TP connection.

Prerequisites

The L2TP connection parameters are adjusted.

Procedure

  • Run the display l2tp-group [ group-name ] command to check the L2TP group configuration.

Example

Run the display l2tp-group [ group-name ] command to view the L2TP group configuration.

  • If tunnel authentication is enabled, TunnelAuth is displayed as Use tunnel authentication, and TunnelPassword is displayed as the configured tunnel password.

  • If RADIUS mandatory authentication is enabled for the tunnel, Radius-auth is displayed as 1.

  • If AAA authentication is enabled for the tunnel, Tunnel aaa Auth is displayed as Use tunnel aaa-authentication.

  • If AVP hidden in transmission is configured, avp-hidden is displayed as 1.

  • Hello interval is displayed as the configured hello interval.

  • Retransmit is displayed as the number of retransmission times of control packets.

  • Timeout is displayed as the interval at which control packets are retransmitted.

  • Idle cut is displayed as the idle-cut timer for the tunnel.

<HUAWEI> display l2tp-group lns1
-----------------------------------------------      
 L2tp-index        : 7                               
 Group-Name        : lns1                             
 Description       :                                 
 GroupType         : ACCEPT_DIALIN_L2TP              
 TunnelAuth        : Not tunnel authentication       
 Tunnel aaa Auth   : Not tunnel aaa-authentication   
 Tunnel Avp46      : Not tunnel Avp46                
 Local tunnel name : R06                             
 TunnelPassword    : ****** 
 Tunnel RecvWindow : 0                               
 Encrypt           : 0                               
 avp-hidden        : 0                               
 Algorithm         : Load-sharing                    
 Radius-auth       : 0                               
 Hello interval    : 60                              
 Retransmit        : 5                               
 Timeout           : 2                               
 Idle cut          : 60                              
 Session limit     : 65535                           
 Used              : 0                               
 IfIndex           : 0xffffffff                      
 Source Ip         : 255.255.255.255                 
 VTNum             : 15                              
 RemoteName        : dd1                             
 DefaultDomain     : dd1                             
 DomainType        : default                         
 TunnelAlarm       : on                              
 MTUFlag           : Enable                          
 MSSFlag           : Enable                          
 Tunnel per user   : 0                               
 Config Dscp       : 255                             
 ForceChap         : 0                               
 LcpReg            : 0                               
 LcpMisReg         : 0                               
 LnsNum            : 0                               
 LnsIPAddress      : 0                               
 LnsName           : 0                               
 LnsWeight         :                                 
                   1): 5                             
                   2): 5                             
                   3): 5                             
                   4): 5                             
                   5): 5                             
                   6): 5                             
                   7): 5                             
                   8): 5                             
 UsedLnsNum        : 0                               
 UnLnsNum          : 0                               
 QOS-mode          : tunnel                          
 QOS-Profile In    :                                 
 QOS-Profile Out   :                                 
 RemoteUsed        : 0                               
 -----------------------------------------------     
 
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17192

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next