No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Diameter Server

Configuring the Diameter Server

A Diameter server must be configured when service policies need to be delivered through a Diameter server.


A Diameter server is used to deliver service policies for value-added services, such as the BOD, DAA, and EDSG services.

Before configuring a Diameter server, get familiar with the following basic concepts:

  • Diameter client: is the local router. Only one client entity can be configured on the router.
  • Diameter server: is the remote policy server RM9000. A maximum of eight Diameter servers can be specified on the router.
  • Diameter connection group: is a Diameter server-client connection group that is uniquely identified by the client name and server name. Since a maximum of eight servers can be specified on the router, at most eight Diameter connection groups may exist on the router.
  • Diameter link: is a Diameter connection that is established using TCP. It is uniquely identified by the IP address and port number of the Diameter client, and IP address and port number of the Diameter server. A maximum of four Diameter links can be set up in the Diameter server group view.

Configuration Process

Figure 3-1 Flowchart of configuring a Diameter server
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17552

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next