No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Class Attribute to Carry the CAR Value

(Optional) Configuring the Class Attribute to Carry the CAR Value

You can configure the Class attribute to carry or not to carry the committed access rate (CAR) value to ensure the communication between the NE40E and RADIUS servers from different vendors.

Context

As specified in the standard RADIUS protocol, the Class attribute carried in an Access-Accept packet sent from the RADIUS server to the client must be returned to the accounting server without any change in an accounting request packet.

The NE40E extends the standard RADIUS protocol by adding the CAR value to the Class attribute (RADIUS attribute 25).

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-server group group-name

    The RADIUS server group view is displayed.

  3. Run radius-server class-as-car [ enable-pir ]

    The Class attribute is configured to carry the CAR value.

    NOTE:

    To meet the requirements of various RADIUS servers, the NE40E can use the RADIUS attribute 25 or RADIUS attribute 26 to send the CAR value to the RADIUS server. The preceding commands configure how to use the RADIUS attribute 25 to send the CAR value to the RADIUS server.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17403

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next