No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Function to Parse the Option 17 Field Based on the Format Defined by the DSL Forum

(Optional) Configuring the Function to Parse the Option 17 Field Based on the Format Defined by the DSL Forum

This section describes how to configure the device to parse the Option 17 field based on the format defined by the DSL Forum and send the obtained sub-attributes to a RADIUS server.

Context

User login request packets carry Relay headers or multi-level Relay headers. The Relay header carries the Option 17 field which contains sub-options. If the format of the options carried in the Relay headers and DHCPv6 packets conforms to that defined by the DSL Forum, the device can parse the Option 17 field and send the obtained sub-attributes to the RADIUS server after the dhcpv6 option-17 decode version1 command is run in the system view. Otherwise, the device does not parse the options nor send the attributes to the RADIUS server.

Perform the following steps on the router.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 option-17 decode version1

    The device is enabled to parse the Option 17 field based on the format defined by the DSL Forum and sent the obtained sub-attributes to a RADIUS server.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 19444

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next