No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After successfully configuring L2TP two-node hot backup, you can view L2TP two-node hot backup configurations and statistics.

Context

Run the following commands to check the previous configuration.

Procedure

  • Run the display remote-backup-profile [ profile-name ] command to check RBP information.
  • Run the display l2tp tunnel rui [ tunnel-item tunnel-id | tunnel-name remote-name | bas-interface { interface-name | interface-type interface-number } | remote-backup-profile profile-name | remote-backup-service service-name ] command to check L2TP tunnel backup information.
  • Run the display l2tp session rui [ session-item session-id | source-ip source-ip-address | destination-ip destination-ip-address | bas-interface { interface-name | interface-type interface-number } | remote-backup-profile profile-name | remote-backup-service service-name ] command to check L2TP session backup information.
  • Run the display l2tp statistics rui [ verbose ] command to check L2TP tunnel backup statistics.
  • Run the display l2tp lac abnormal-rui-users command to check information about users that have abnormal online status on a device enabled with L2TP two-node hot backup.
  • Run the display access-user domain command to display information about the access users in a specified domain.

Example

After completing L2TP two-node hot backup configurations, run the display remote-backup-profile command. If the following information is displayed, the preceding configurations are successful:

  • The value of the Service field is bras l2tp.
<HUAWEI> display remote-backup-profile profile1
-----------------------------------------------
 Profile-Index         : 0x800
 Profile-Name         : profile1
 Service              : bras l2tp
 Remote-backup-service : s1
 Backup-ID            : 10
 track protocol         : VRRP
 VRRP-ID              : 1
 VRRP-Interface         : Eth-Trunk1.2
 Interface            :
                     Eth-Trunk1.1
 State                : Master
 Peer State            : Slave
 Backup mode         : hot
 Slot-Number          : --
 Card-Number          : --
 Port-Number          : --
 Traffic threshold       : --
 Traffic interval         : 1(minutes)  
<HUAWEI> display l2tp tunnel rui
 Tunnel ID base: 32768
LTID: local assigned tunnel ID , RTID: Remote assigned tunnel ID
RA: Remote Ip address, RN: Remote Name, RG: Register(L:local,R:remote)
Basic Info                                             Redundant info 
------------------------------------------------------------------------------
LTID  RTID  RA              RN                Sessions RG state    Life(s)
------------------------------------------------------------------------------
34    22    8.8.8.8         HUA-241           1        L  active   323s       
------------------------------------------------------------------------------
Total 1, printed 1  
<HUAWEI> display l2tp session rui
 LTID: local assigned tunnel ID , RTID: Remote assigned tunnel ID
 LSID: local assigned session ID , RSID: Remote assigned session ID
 RG: Register(L:local,R:remote), FWS: Fowarding state(L:local interface, P:protect path).
 Basic Info                                        Redundant info
 ------------------------------------------------------------------------------
 LSID  RSID  LTID  RTID  UserID  UserName          RG state    Life        FWS
 ------------------------------------------------------------------------------
 9     75    8     88    8       user#@domain1     L  active   669510s     L
 ----------------------------------------------------------------------------
  Total 1, printed 1                  
<HUAWEI> display l2tp statistics rui
 statistics of l2tp redundant:
                       Receive         Send
------------------------------------------------------------------------------
 Tunnel establish   |   100             100
 Tunnel teardown    |   40              20
 Session establish  |   300             10
 Session teardown   |   300             50
 Hello packet       |   100             100   From remote peer: 100
 ZLB packet         |   30              30    From remote peer: 30
------------------------------------------------------------------------------
last receive backup message information:    
    [1] last drop %d tunnel establish backup message.
    [2] last update %d tunnel backup message.
    [3] last create %d tunnel backup message.
    [4] last teardown %d tunnel backup message.
    [5] last d% hello/ZLB backup message.
    [6] last drop %d session establish backup message.
    [7] last update %d session backup message.
    [8] last create %d session backup message.
    [9] last teardown %d session backup message.
------------------------------------------------------------------------------
<HUAWEI> display l2tp lac abnormal-rui-users
 The upstream and downstream of following LAC users are all without increasing. 
 LTID: local assigned tunnel ID , RTID: Remote assigned tunnel ID 
 LTSD: local assigned session ID , RTSD: Remote assigned session ID
 RG: Register(L:local,R:remote), FWS: Fowarding state(L:local interface,P:protect path)
 LSID    RSID    LTID   RTID  UserID  UserName   RG state    MAC  
------------------------------------------------------------------------------
27823   248    2       4    7958     user5@hz   L  active    0011-1111-2222
35523   2769   40000   5    13818    user9@hz   R  inactive  0011-3333-2222
------------------------------------------------------------------------------
Total 2, printed 2
Run the display access-user domain command. If the following information is displayed, the preceding configurations are successful:
[HUAWEI] display  access-user domain  huawei
  ------------------------------------------------------------------------------
  UserID  Username                Interface      IP address       MAC
				      Vlan                    IPv6 address                   Access type
	------------------------------------------------------------------------------
	1536    user@huawei                   Eth-Trunk123.100  -       4400-0049-24c3
	100/1         -                        PPPoE                          
	------------------------------------------------------------------------------
	Normal users                       : 0
	RUI Local users                    : 1
	RUI Remote users                   : 0
	Total users                        : 1
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17601

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next