No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After the configuration is complete, you can view details about the remote server and the remote backup service type, which is BRAS.

Context

Run the following commands to check the previous configuration.

Procedure

  • Run the display remote-backup-profile [ profile-name ] command to check RBP information.
  • Run the display remote-backup-service [ service-name [ verbose ] ] command to check RBS information.
  • Run the display backup-user [ user-id user-id | username user-name ] command to check backup user information.
  • Run the display access-user interface interface-type interface-number [ normal | [ rui-local | rui-remote ] [ master | slave ] ] command to check information about the access users on a specified interface.

Example

Run the display remote-backup-profile command to view RBP information, including the name of the remote backup service, name of the interface bound to a Virtual Router Redundancy Protocol (VRRP) backup group, name of the user access interface bound to the RBP, protocol used to detect the link status, RBP status, and backup mode.

<HUAWEI>display remote-backup-profile profile1
--------------------------------------------
 Profile-Index        : 0x802
 Profile-Name         : profile1
 Service              : bras
 Remote-backup-service: service1
 Backup-ID            : 10
 track protocol       : VRRP
 VRRP-ID              : 1
 VRRP-Interface       : GigabitEthernet1/0/0.2
 Access-Control       : Odd-Mac 
 State                : Master
 Peer State           : Slave
 VRRP-ID              : 2 
 VRRP-Interface       : GigabitEthernet1/0/0.3
 Access-Control       : Even-Mac 
 State                : Slave 
 Peer State           : Master
 Interface            :
                        GigabitEthernet1/0/0.1
 Backup mode          : hot
 Slot-Number          : 1
 Card-Number          : 0
 Port-Number          : 0
 Traffic interval     : 10(minutes)
 

Run the display remote-backup-service command to view information about the RBS, including the server index number, server name, TCP connection status, remote IP address, local IP address, TCP port number, tunnel name, and IP address pool name.

<HUAWEI>display remote-backup-service rui
----------------------------------------------------------                      
 Service-Index    : 0                                                           
 Service-Name     : rui                                                          
 TCP-State        : Connected                                                   
 Peer-ip          : 10.0.0.1                                                    
 Source-ip        : 10.0.0.2                                                    
 TCP-Port         : 11111                                                       
 Track-BFD        : --                                                          
 Track-interface0 : GigabitEthernet3/0/0
                    Weight :10
 Track-interface1 : GigabitEthernet3/0/1
                    Weight :10
                    Last up time :2011-08-25 11:56:37
-----------------------------------------------------------------                      
                                                                                
 ip pool: L2tp tunnel source:
                 loopback0
                 loopback1
poolv4_yyz metric 10
         r3 metric 10
         r4 metric 20
         remotev4 metric 10
ipv6 pool:  
         1234 metric 10
         iana_yyz metric 10
         iapd_yyz metric 10
         lo metric 10
         loc_vpn metric 10
         nd metric 10
         pd metric 10
         remote_del_yyz metric 10
         remotev6_yyz metric 10 Failure ratio : 50%
 Failure duration  :0 min                      
 Rbs-ID         : 0                                                             
 Protect-type   : public(lsp)                                                   
 Tunnel-policy  : tp1                                                           
 Peer-ip        : 10.0.0.1                                                      
 Vrfid          : 0                                                             
 Tunnel-state   : UP                                                            
 Tunnel-OperFlag: NORMAL                                                        
 Spec-interface : Null                                                          
 Total users    : 100                                                           
 Path 1:                                                                        
     Tunnel-index   : 0xc000003                                                 
     Out-interface  : GigabitEthernet3/0/2                                      
     Vc-label       : 0                                                         
     User-number    : 100

Run the display backup-user command to view information about backup users, including the number of local and remote users.

<HUAWEI> display backup-user
  Remote-backup-service: rbs2
  Total Users Numer: 10
------------------------------------------------------------------------
 100     101     102     103     104     105     106     107     108     109
------------------------------------------------------------------------
  Local Users Number	:10
  Remote Users Number	:0

Run the display access-user interface command to view information about the access users on a specified interface.

<HUAWEI>display access-user interface GigabitEthernet 1/0/2.1
------------------------------------------------------------------------------
  UserID  Username                Interface      IP address       MAC
          Vlan          IPv6 address             Access type
  ------------------------------------------------------------------------------
  1       user1@huawei            GE1/0/2.1      192.168.7.199    0016-ecb7-a879
          -/-           -                         PPPoE
  ------------------------------------------------------------------------------
  2       user2@huawei            GE1/0/2.1         -        0016-ecb7-a876
          -/-           -          99::/64         PPPoE
  Normal users                       : 0
  RUI Local users                    : 2
  RUI Remote users                   : 0
  Total users                        : 2
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17138

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next