No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the User-Defined Encapsulation for Radius Attributes

(Optional) Configuring the User-Defined Encapsulation for Radius Attributes

Context

You can also specify a DHCP/DHCPv6 option to encapsulate a RADIUS attribute.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-server group group-name

    The RADIUS server group view is displayed.

  3. Run radius-attribute assign attribute-name { dhcp dhcp-option-code | dhcpv6 dhcpv6-option-code }

    The device is configured to encapsulate a RADIUS attribute in a specified DHCP/DHCPv6 option.

    NOTE:

    The value of attribute-name can only be HW-PCP-Server-Name.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17407

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next