No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration Result

Checking the Configuration Result

After successfully configuring multicast two-node hot backup, you can view the configuration result and statistics.

Prerequisites

Multicast two-node hot backup configuration is complete.

Procedure

  • Run the display remote-backup-profile [ profile-name ] command to view RBP information.
  • Run the display multicast-rui statistic all command to view statistics about multicast two-node hot backup of access users.

Example

After multicast two-node hot backup configuration is complete, run the display remote-backup-profile command. If the following information is displayed, the preceding configurations are successful:

  • The Service value is bras multicast.
  • The DHCP user IGMP copy value is enable or disable.
<HUAWEI> display remote-backup-profile profile1
 ----------------------------------------------- Profile-Index        : 0x800 Profile-Name         : profile1  Service              : bras multicast Remote-backup-service: service1 Backup-ID            : 10 track protocol       : VRRP VRRP-ID              : 1 VRRP-Interface       : Eth-Trunk1.2 Interface            : Eth-Trunk1.1 State                : Master Peer State           : Slave Backup mode          : hot Slot-Number          : -- Card-Number          : -- Port-Number          : -- Traffic threshold    : 50(MB) Traffic interval     : 10(minutes)  DHCP user IGMP copy  : enable    
<HUAWEI> display multicast-rui statistic all
------------------Multicast RUI statistic------------------- Main board: Master send to slave: 0        Slave receive: 0 Send fail: 0                    Receive fail: 0 Send success: 0                 Receive success: 0

 Master MPU receive from LPU: 0        Slave MPU send to LPU: 0 Receive fail: 0                        Send fail: 0 Receive success: 0                     Send success: 0 ------------------------------------------------------------ IO board:(Slot 2) Master LPU send to MPU: 0        Slave LPU receive from MPU: 0 Send fail:0                         Receive fail: 0 Send success: 0                     Receive success: 0
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17364

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next