No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the LAC Configuration

Verifying the LAC Configuration

This section describes how to check the configurations of the L2TP group, session information, and the tunnel on the LAC after the LAC is configured and users go online.

Procedure

  • Run the display l2tp-group [ group-name ] command to check the L2TP group configuration.
  • Run the display l2tp session lac [ session-item session-id | source-ip source-ip-address | destination-ip destination-ip-address ] command to check information about the current LAC session.
  • Run the display l2tp tunnel lac [ tunnel-item tunnel-id | tunnel-name remote-name ] command to check information about the tunnel on the LAC.
  • Run the display l2tp tunnel [ lac slot slot-id ] [ tunnel-item tunnel-id | tunnel-name remote-name ]command to view information about L2TP tunnels.
  • Run the display l2tp session { lac slot slot-id } [ session-item session-id | source-ip source-ip-address | destination-ip destination-ip-address ]command to view information about L2TP sessions.

Example

Run the display l2tp-group command, and you can view the following:

  • GroupType is displayed as REQUEST_DIALIN_L2TP.

  • LnsIPAddress and LnsWeight are respectively displayed as the IP addresses and weights of the LNSs.

  • Source Ip is displayed as the IP address assigned to the source interface of the tunnel.

<HUAWEI> display l2tp-group lac
    -----------------------------------------------                        
   L2tp-index        : 3                                                  
   Group-Name        : lac                                            
   Description       :                                                    
   GroupType         : REQUEST_DIALIN_L2TP                                
   TunnelAuth        : Not tunnel authentication                          
   Tunnel aaa Auth   : Not tunnel aaa-authentication                      
   Tunnel Avp46      : Not tunnel Avp46                                   
   Local tunnel name : lac                                                
   Tunnel RecvWindow : 0                                                  
   Encrypt           : 0                                                  
   avp-hidden        : 0                                                  
   Algorithm         : Load-sharing                                       
   Radius-auth       : 0                                                  
   Hello interval    : 60                                                 
   Retransmit        : 5                                                  
   Timeout           : 2                                                  
   Idle cut          : 60                                                 
   Session limit     : 65535                                              
   Used              : 2                                                  
   IfIndex           : 0xffffffff                                         
   Source Ip         : 255.255.255.255                                    
   VTNum             : 65535                                              
   DefaultDomain     :                                                    
   DomainType        : default                                            
   TunnelAlarm       : on                                                 
   MTUFlag           : Enable                                             
   MSSFlag           : Enable                                             
   Tunnel per user   : 0                                                  
   Config Dscp       : 255                                                
   ForceChap         : 0                                                  
   LcpReg            : 0                                                  
   LcpMisReg         : 0                                                  
   LnsNum            : 2                                                  
   LnsIPAddress      : 2                                                  
                     1): 55.55.55.55 w: 1                                 
                     2): 55.55.55.55 w: 1                                 
   LnsName           : 2                                                  
                     1): NULL                                             
                     2): NULL                                             
   LnsWeight         :                                                    
                     1): 5                                                
                     2): 5                                                
                     3): 5                                                
                     4): 5                                                
                     5): 5                                                
                     6): 5                                                
                     7): 5                                                
                     8): 5                                                
   UsedLnsNum        : 2                                                  
                     1): 55.55.55.55 TID:  5  expire: 0  lnsIndex:  1     
                     2): 55.55.55.55 TID:  6  expire: 0  lnsIndex:  2     
   UnLnsNum          : 0                                                  
   QOS-mode          : tunnel                                             
   QOS-Profile In    :                                                    
   QOS-Profile Out   :                                                    
   RemoteUsed        : 0                                                 
   CallingNORemoteIdEnable: Disable                              
   LacNasPortEnable       : 0                                        
   CallingNOAvpFormat     : radius-force

 
   -----------------------------------------------                        
<HUAWEI> display l2tp tunnel lac
  ---------------------------------------------------------
  -----------tunnel information in LAC----------------------
 LocalTID RemoteTID RemoteAddress    Port   Sessions RemoteName
 --------------------------------------------------------------------------
 2        21        7.7.7.7          1701   20       209lns
 --------------------------------------------------------------------------
  Total 1,1 printed
<HUAWEI> display l2tp session lac
  LocalSID  RemoteSID  LocalTID  RemoteTID  PPPID    UserID  UserName 
 ----------------------------------------------------------------------------
  16       9          13        9          3433006165 192283 tpsa@test_l2tp
 ----------------------------------------------------------------------------
  Total 1, printed 1  
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17301

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next