No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing DHCPv4 Statistics

Clearing DHCPv4 Statistics

You can clear DHCPv4 statistics by clearing the DHCPv4 relay statistics.


DHCPv4 statistics cannot be restored after they are cleared. Exercise caution when running reset commands.


  • Run the reset dhcp relay statistics [ interface interface-type interface-number [ .sub-interface-number ] command in the user view to clear the DHCPv4 relay statistics.
  • Run the reset ip-pool max-usage [ pool [ pool-name ] | domain [ domain-name ] ] command in the user view to clear the historical maximum usage of addresses in an IPv4 address pool.
  • Run the reset ip-pool max-ratio domain command in the user view to clear statistics about IP address pool usage in all domains on the device.
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17300

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next