No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling User Traffic Statistics Collection Based on Inner or Outer VLAN IDs on a Device

Enabling User Traffic Statistics Collection Based on Inner or Outer VLAN IDs on a Device

This section describes how to enable user traffic statistics collection based on inner or outer VLAN IDs on a device.

Context

By default, a device can only collect user traffic statistics based on inner or outer VLAN IDs on interfaces. To allow the device to collect user traffic statistics based on inner or outer VLAN IDs on the entire device, enable user traffic statistics collection based on inner or outer VLAN IDs on the device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run access user-flow-statistics enable

    User traffic statistics collection is enabled based on inner or outer VLAN IDs on the device.

  3. Run commit

    The configuration is committed.

Result

  • After PPPoE users go online through QinQ VLAN tag termination sub-interfaces and any is specified for inner VLAN tags, which means that packets carrying any inner VLAN tags are forwarded, you can run the display access user-flow-statistics configuration or display vlan-statistics pevlan command to check user traffic collection configuration or user traffic statistics on a device.
  • To collect user traffic statistics in a coming period, run the reset vlan-statistics pevlan command to clear the existing statistics based on a specified inner or outer VLAN ID. The system then starts to collect user traffic statistics about the specified inner or outer VLAN ID from zero. After a specified period elapses, run the display vlan-statistics pevlan command to view the newly collected statistics.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 19501

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next