No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring User Testing

Configuring User Testing

User testing is used to locate a fault by checking whether a user can pass the authentication of the RADIUS server group when the AAA server does not function properly.

Context

Perform the following steps on the NE40E:

NOTE:
  • The new password is at least eight characters long and contains at least two of upper-case letters, lower-case letters, digits, and special characters.
  • When configuring an authentication password, select the ciphertext mode because the password is saved in configuration files in simple text if you select simple text mode, which has a high risk. To ensure device security, change the password periodically.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-test-group radius-test-group-name

    The RADIUS server test template is configured.

  3. Run include [ authentication | accounting ] radius-attr-name { radius-attribute-value | auto }

    The RADIUS attribute is configured to be sent along with the RADIUS server test template.

  4. Run exclude [ authentication | accounting ] radius-attr-name

    The RADIUS attribute is configured not to be sent along with the RADIUS server test template.

Follow-up Procedure

You can run the test-aaa user-name password [ password random [ random1 random2 ] timestamp [ timestamp1 timestamp2 ] ] radius-group group-name [ chap | pap ] [ test-group test-group-name ] command to locate a fault by checking whether a user can pass the authentication of the RADIUS server group.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17373

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next