No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Disabling User Information Remote Backup in a Specified Domain

(Optional) Disabling User Information Remote Backup in a Specified Domain

User information remote backup can be disabled for users who get online from a specified domain as required.

Context

User information remote backup is enabled by default for users who get online through an AAA domain. To disable this function, run the undo peer-backup enable command. Information about authenticated users will then not be backed up even if hot backup is enabled on the user access interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    The AAA domain view is displayed.

  4. Run undo peer-backup enable

    User information remote backup is disabled for users getting online from a specified domain.

    NOTE:

    The user information remote backup configuration cannot be modified in the view of an AAA domain where users have logged in. To be specific, if user information remote backup configuration is disabled, the peer-backup enable command cannot be run. If user information remote backup configuration is enabled, the undo peer-backup enable command cannot be run.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17645

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next