No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Refined IPv4 Route Advertisement

(Optional) Configuring Refined IPv4 Route Advertisement

Refined IPv4 route advertisement can classify routes and advertise them to different networks.

Context

User routes include routes generated by an address pool, and routes generated based on either the Framed-Route attribute or IP-Netmask attribute delivered by the RADIUS server. Management users can advertise routes to the management network while users accessing the Internet can advertise routes to the Internet. Routes are classified based on tags and imported using routing policies. This process allows various routes to be advertised to specific networks.

Procedure

  • Configure a tag value of a route for a specified type of address pool, such as local or remote address pools.
    1. Run system-view

      The system view is displayed.

    2. Run ip unr { framed-route-tag tag-value | framed-ip-netmask-tag tag-value | framed-ip-address-tag tag-value } *

      The route tag is configured.

    3. Run commit

      The configuration is committed.

  • Configure a tag value of a route for a single address pool.
    1. Run system-view

      The system view is displayed.

    2. Run ip pool (system view)

      The IP address pool view is displayed.

    3. Run unr tag tag-value

      The route tag is configured.

    4. Run commit

      The configuration is committed.

Follow-up Procedure

Create a routing policy. Specify a route tag to classify routes. Use OSPF or BGP to import various routes. For details, see Routing Policy Configuration.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 19299

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next