No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Domain Mapping List

(Optional) Configuring a Domain Mapping List

This section describes how to configure a domain mapping list.

Context

In a hot backup scenario where a domain name is delivered by the RADIUS server or carried in a packet from a user terminal, the backup device must map the domain name into different domain names for different RBSs to ensure resource independency in the RBSs.

Procedure

  1. Configure a domain mapping list on the master and backup devices.
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run domain domain-name

      A domain is created.

    4. Run domain-map-list domain-map-list-name

      A domain mapping list is created.

    5. Run domain source-domain mapping destination-domain [ extend ]

      A domain mapping is added to the domain mapping list.

    6. Run commit

      The configuration is committed.

  2. Configure domain mapping in an RBS.
    1. Run system-view

      The system view is displayed.

    2. Run remote-backup-service service-name

      The RBS view is displayed.

    3. Run domain-map-list domain-map-list-name

      A domain mapping list is bound to the RBS.

    4. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17238

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next