No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Diameter-enabled Interface to Support EDSG Services

(Optional) Configuring a Diameter-enabled Interface to Support EDSG Services

Before configuring a Diameter server for EDSG services, enable the Diameter-enabled interface to support EDSG services.

Context

By default, a Diameter server cannot deliver EDSG services through a Gx interface. Therefore, configure the Diameter-enabled Gx interface to allow the Diameter server to deliver EDSG services.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run diameter predefined-rule support-type edsg

    The Diameter-enabled Gx interface is configured to allow the Diameter server to deliver EDSG services.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17154

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next