No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Diameter Link

Configuring a Diameter Link

A Diameter link connects a Diameter client and a Diameter server.

Context

A Diameter server group consists of the Diameter client, Diameter server, and Diameter link.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run diameter-local localname interface interface-type interface-number [ host host-name | product product-name | realm realm-name ]*

    The Diameter client entity information is configured, including the name, host IP address (IP address of the interface specified by interface interface-type interface-number), host name, domain name, and product name of the client.

  3. Run diameter-peer peer-name { ip ip-address | ipv6 ipv6-address } [ vpn-instance vpn-instance ] port port-number [ host host-name | realm realm-name ]*

    The Diameter server entity information is specified, including the host name, domain name, IP address, and port number of the server.

  4. Run diameter-server group group-name

    A Diameter server group is created, and its view is displayed.

  5. Run diameter-link local local-name peer peer-name client-port port-number [ weight weight-value ]

    A Diameter link is set up between the Diameter client and server.

  6. (Optional) Run diameter no-send-ccri without subscription-id

    The device is disabled from sending CCR-I messages to a Diameter server for user login after the device receives a RADIUS authentication response message that does not carry the subscription-id attribute.

  7. (Optional) Run diameter case-sensitive predefined-rule edsg

    The device is configured to process case sensitivity of the predefined EDSG rules delivered by the Diameter server.

  8. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 19222

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next