No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring DSCP Values for RADIUS Packets

(Optional) Configuring DSCP Values for RADIUS Packets

To prevent RADIUS packets sent by the NE40E from being discarded in the case of network congestion, you can configure DSCP values for the RADIUS Packets.

Context

You can configure DSCP values for RADIUS packets, including the RADIUS packets sent by the NE40E to a RADIUS server and the RADIUS packets sent by the NE40E to an AP/AC.

Perform the following steps on the NE40E:

Procedure

  • Configure DSCP values of RADIUS packets sent by the NE40E to a RADIUS server. DSCP priorities of RADIUS packets sent by the NE40E to a RADIUS server can be configured in two modes. The DSCP value of RADIUS packets configured in the RADIUS server group view has a higher priority.

    In the system view, configure a DSCP value for RADIUS packets.

    1. Run system-view

      The system view is displayed.

    2. Run radius-server packet dscp dscp

      A DSCP value is configured for RADIUS packets sent by the NE40E.

    In the RADIUS server group view, configure a DSCP value for RADIUS packets.

    1. Run system-view

      The system view is displayed.

    2. Run radius-server group group-name

      The RADIUS server group view is displayed.

    3. Run radius-server packet dscp dscp

      A DSCP value is configured for RADIUS packets sent by the NE40E.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17193

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next