No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Default Invalid VLAN ID in the calling-station-id Attribute

Configuring the Default Invalid VLAN ID in the calling-station-id Attribute

To ensure the interconnection between a Huawei device and a non-Huawei device, you can configure the default invalid VLAN IDs in the calling-station-id attributes for the devices.

Context

Some LNSs consider 0 as an invalid VLAN ID and some LNSs consider 4096 as an invalid VLAN ID. You need to configure the invalid VLAN ID according to the specification of the remote LNS.

Perform the following steps on the NE40E:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run l2tp calling-station-id vlan-0-invalid

    The default invalid VLAN ID in the calling-station-id attribute delivered from the L2TP user (LAC) to the LNS is configured to be 0.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17441

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next